Merchandise Description
We manufacture screw and kneading components for co-rotating twin screw extruders ranging from 15.6 mm to 350 mm and in excess of.
Our production specializes in segmented screws for twin screw extruders and is optimized for flexible order managing.
Co-rotating twin screw factors for
-APV -KOBE -OMC
-Buhler -KraussMaffei -Theysohn
-Buss -Berstorff -Toshiba
-Clextral -Labtech -USEON
-Coperion -Lantai -other folks
-JSW -Leistritz
-Keya -Maris
Types of the Screw Segments
* One Keyway * Square Keyslot *Large torque key button * Dual keyslot
* Involute inner spline * Spherical keyslot *Retackle spline * Client’s requirements available
We offer you a broader selection of components:
* 40CrNiMo * WR15E * WR30
By working carefully with customers in deciding on optional components,we can minimize put on and tear and related costs.
About our Business
Joiner Machinery Co.,Ltd has several several years expertise in the manufacture and offer of new and refurbished put on parts for all main can make of twin-screw extruders and the Industries included in plastics sector, chemical sector, powder coating, foods foodstuff market, wood plastic etc..
Via near operating relationships with our buyers we have been CZPT to satisfy their requirements. Adaptability permits us to design and style and manufacture regular and bespoke elements for unique apps.
By means of our hugely trained and seasoned personnel we are CZPT to offer you technical help and suggestions.
Our strengths are dependent on a lot of several years experience giving the following:
* Aggressive expenses per unit of production
* Fast switch spherical for selection and delivery on refurbished parts
* Components accessible from stock for a wide selection of extruder makes
* Thorough inspection process on all areas prior to dispatch
* A time proven good quality service
* Newest production tactics and metallurgy, guaranteeing regular and reputable overall performance of parts
* Personalized remedies to meet specific needs.
Our Production Plant
FRQ
one. Q: Are you a factory or buying and selling business?
—-A: A factory
2. Q: In which is your factory found? How can I visit there?
—–A: Our manufacturing facility is located in HangZhou, ZheJiang Province, China,
1) You can fly to HangZhou Airport straight. We will choose you up when you arrive in the airport
All our consumers, from domestic or abroad, are warmly welcome to check out us!
three.Q: What can make you diverse with other folks?
—-A: 1) Our Excellent Service
For a quick, no hassle quotation just ship e-mail to us
We guarantee to reply with a price inside of 24 hours – sometimes even in the hour.
two) Our quick production time
For Regular orders, we will promise to generate in 30 functioning days.
As a manufacturer, we can guarantee the supply time according to the formal deal.
4.Q: How about the shipping time?
—-A: This depends on the product. Generally normal goods are sent inside 30 days.
- Q: What is the expression of payment?
—-A: 1) T/T payment 2) LC
six.Q: May possibly I know the position of my purchase?
—-A: Yes .We will deliver you info and images at different manufacturing phase of your get. You will get the most current data in time.
|
US $5-20 / Piece | |
10 Pieces (Min. Order) |
###
| Transport Package: | Wood |
|---|---|
| Trademark: | JOINER |
| Origin: | Sichuan |
###
| Samples: |
US$ 5/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
|
US $5-20 / Piece | |
10 Pieces (Min. Order) |
###
| Transport Package: | Wood |
|---|---|
| Trademark: | JOINER |
| Origin: | Sichuan |
###
| Samples: |
US$ 5/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
Screw Sizes and Their Uses
Screws have different sizes and features. This article will discuss screw sizes and their uses. There are two main types: right-handed and left-handed screw shafts. Each screw features a point that drills into the object. Flat tipped screws, on the other hand, need a pre-drilled hole. These screw sizes are determined by the major and minor diameters. To determine which size of screw you need, measure the diameter of the hole and the screw bolt’s thread depth.
The major diameter of a screw shaft
The major diameter of a screw shaft is the distance from the outer edge of the thread on one side to the tip of the other. The minor diameter is the inner smooth part of the screw shaft. The major diameter of a screw is typically between two and sixteen inches. A screw with a pointy tip has a smaller major diameter than one without. In addition, a screw with a larger major diameter will have a wider head and drive.
The thread of a screw is usually characterized by its pitch and angle of engagement. The pitch is the angle formed by the helix of a thread, while the crest forms the surface of the thread corresponding to the major diameter of the screw. The pitch angle is the angle between the gear axis and the pitch surface. Screws without self-locking threads have multiple starts, or helical threads.
The pitch is a crucial component of a screw’s threading system. Pitch is the distance from a given thread point to the corresponding point of the next thread on the same shaft. The pitch line is one element of pitch diameter. The pitch line, or lead, is a crucial dimension for the thread of a screw, as it controls the amount of thread that will advance during a single turn.
The pitch diameter of a screw shaft
When choosing the appropriate screw, it is important to know its pitch diameter and pitch line. The pitch line designates the distance between adjacent thread sides. The pitch diameter is also known as the mean area of the screw shaft. Both of these dimensions are important when choosing the correct screw. A screw with a pitch of 1/8 will have a mechanical advantage of 6.3. For more information, consult an application engineer at Roton.
The pitch diameter of a screw shaft is measured as the distance between the crest and the root of the thread. Threads that are too long or too short will not fit together in an assembly. To measure pitch, use a measuring tool with a metric scale. If the pitch is too small, it will cause the screw to loosen or get stuck. Increasing the pitch will prevent this problem. As a result, screw diameter is critical.
The pitch diameter of a screw shaft is measured from the crest of one thread to the corresponding point on the next thread. Measurement is made from one thread to another, which is then measured using the pitch. Alternatively, the pitch diameter can be approximated by averaging the major and minor diameters. In most cases, the pitch diameter of a screw shaft is equal to the difference between the two.
The thread depth of a screw shaft
Often referred to as the major diameter, the thread depth is the outermost diameter of the screw. To measure the thread depth of a screw, use a steel rule, micrometer, or caliper. In general, the first number in the thread designation indicates the major diameter of the thread. If a section of the screw is worn, the thread depth will be smaller, and vice versa. Therefore, it is good practice to measure the section of the screw that receives the least amount of use.
In screw manufacturing, the thread depth is measured from the crest of the screw to the root. The pitch diameter is halfway between the major and minor diameters. The lead diameter represents the amount of linear distance traveled in one revolution. As the lead increases, the load capacity decreases. This measurement is primarily used in the construction of screws. However, it should not be used for precision machines. The thread depth of a screw shaft is essential for achieving accurate screw installation.
To measure the thread depth of a screw shaft, the manufacturer must first determine how much material the thread is exposed to. If the thread is exposed to side loads, it can cause the nut to wedge. Because the nut will be side loaded, its thread flanks will contact the nut. The less clearance between the nut and the screw, the lower the clearance between the nut and the screw. However, if the thread is centralized, there is no risk of the nut wedgeing.
The lead of a screw shaft
Pitch and lead are two measurements of a screw’s linear distance per turn. They’re often used interchangeably, but their definitions are not the same. The difference between them lies in the axial distance between adjacent threads. For single-start screws, the pitch is equal to the lead, while the lead of a multi-start screw is greater than the pitch. This difference is often referred to as backlash.
There are two ways to calculate the pitch and lead of a screw. For single-start screws, the lead and pitch are equal. Multiple-start screws, on the other hand, have multiple starts. The pitch of a multiple-start screw is the same as its lead, but with two or more threads running the length of the screw shaft. A square-thread screw is a better choice in applications requiring high load-bearing capacity and minimal friction losses.
The PV curve defines the safe operating limits of lead screw assemblies. It describes the inverse relationship between contact surface pressure and sliding velocity. As the load increases, the lead screw assembly must slow down in order to prevent irreversible damage from frictional heat. Furthermore, a lead screw assembly with a polymer nut must reduce rpm as the load increases. The more speed, the lower the load capacity. But, the PV factor must be below the maximum allowed value of the material used to make the screw shaft.
The thread angle of a screw shaft
The angle between the axes of a thread and the helix of a thread is called the thread angle. A unified thread has a 60-degree angle in all directions. Screws can have either a tapped hole or a captive screw. The screw pitch is measured in millimeters (mm) and is usually equal to the screw major diameter. In most cases, the thread angle will be equal to 60-degrees.
Screws with different angles have various degrees of thread. Originally, this was a problem because of the inconsistency in the threading. However, Sellers’s thread was easier to manufacture and was soon adopted as a standard throughout the United States. The United States government began to adopt this thread standard in the mid-1800s, and several influential corporations in the railroad industry endorsed it. The resulting standard is called the United States Standard thread, and it became part of the ASA’s Vol. 1 publication.
There are two types of screw threads: coarse and fine. The latter is easier to tighten and achieves tension at lower torques. On the other hand, the coarse thread is deeper than the fine one, making it easier to apply torque to the screw. The thread angle of a screw shaft will vary from bolt to bolt, but they will both fit in the same screw. This makes it easier to select the correct screw.
The tapped hole (or nut) into which the screw fits
A screw can be re-threaded without having to replace it altogether. The process is different than that of a standard bolt, because it requires threading and tapping. The size of a screw is typically specified by its major and minor diameters, which is the inside distance between threads. The thread pitch, which is the distance between each thread, is also specified. Thread pitch is often expressed in threads per inch.
Screws and bolts have different thread pitches. A coarse thread has fewer threads per inch and a longer distance between threads. It is therefore larger in diameter and longer than the material it is screwed into. A coarse thread is often designated with an “A” or “B” letter. The latter is generally used in smaller-scale metalworking applications. The class of threading is called a “threaded hole” and is designated by a letter.
A tapped hole is often a complication. There is a wide range of variations between the sizes of threaded holes and nut threads, so the tapped hole is a critical dimension in many applications. However, even if you choose a threaded screw that meets the requisite tolerance, there may be a mismatch in the thread pitch. This can prevent the screw from freely rotating.
editor by czh 2022-12-17