China ODM/OEM Needle CNC Lathing Grinding High Precision Motor Rotor Drive Stainless Steel Shaft for Medical Machine with Surface Treatment Best Service set screw shaft collar

Solution Description

You can kindly uncover the specification information from underneath:

HangZhou Mastery Equipment Engineering Co., LTD helps manufacturers and brands satisfy their machinery parts by precision manufacturing. High precision machinery goods like the shaft, worm screw, bushing……Our products are used commonly in electronic motors, the primary shaft of the motor, the transmission shaft in the gearbox, couplers, printers, pumps, drones, and so on. They cater to diverse industries, such as automotive, industrial, energy tools, garden instruments, health care, intelligent property, and many others.

Mastery caters to the industrial industry by offering substantial-stage cardan shafts, pump shafts, and bushing that come in diverse sizes ranging from diameter 3mm-50mm. Our merchandise are especially formulated for transmissions, robots, gearboxes, industrial supporter, and drones, and many others.

Mastery factory at present has a lot more than 100 main manufacturing gear this kind of as CNC lathe, CNC machining middle, CAM Automatic Lathe, grinding equipment, hobbing machine, and so forth. The generation ability can be up to 5-micron mechanical tolerance precision, automatic wiring device processing range covering 3mm-50mm diameter bar.

Essential Technical specs:

Title Shaft/Motor Shaft/Drive Shaft/Equipment Shaft/Pump Shaft/Worm Screw/Worm Equipment/Bushing/Ring/Joint/Pin
Material 40Cr/35C/GB45/70Cr/40CrMo
Procedure Machining/Lathing/Milling/Drilling/Grinding/Sprucing
Dimension 2-400mm(Personalized)
Diameter φ5.8(Tailored)
Diameter Tolerance .008mm
Roundness .005mm
Roughness Ra0.8
Straightness .05mm
Hardness HRC20-thirty
Duration seventeen.1mm(Custom-made)
Warmth Treatment Accessible
Floor treatment method Coating/Ni plating/Zn plating/QPQ/Carbonization/Quenching/Black Remedy/Steaming Remedy/Nitrocarburizing/Carbonitriding

Good quality Administration:

  • Uncooked Substance Good quality Control: Chemical Composition Investigation, Mechanical Efficiency Check, ROHS, and Mechanical Dimension Verify
  • Generation Process Quality Manage: Total-dimensions inspection for the 1st element, Crucial dimension method inspection, SPC approach monitoring
  • Lab capacity: CMM, OGP, XRF, Roughness meter, Profiler, Computerized optical inspector
  • High quality technique: ISO9001, IATF 16949, ISO14001
  • Eco-Helpful: ROHS, Attain.

Packaging and Transport:  

Through the complete approach of our source chain management, consistent on-time supply is essential and really essential for the good results of our business.

Mastery utilizes a number of various shipping and delivery techniques that are in depth underneath:

For Samples/Modest Q’ty: By Express Companies or Air Fright.

For Official Get: By Sea or by air according to your prerequisite.

Mastery Solutions:

  • 1-Quit solution from notion to product/ODM&OEM suitable
  • Individual analysis and sourcing/purchasing jobs
  • Individual supplier management/development, on-web site good quality check out projects
  • Muti-varieties/modest batch/customization/trial order are satisfactory
  • Overall flexibility on amount/Rapid samples
  • Forecast and raw content preparing in progress are negotiable
  • Fast estimates and rapid responses

General Parameters:

If you are seeking for a reputable machinery solution associate, you can rely on Mastery. Work with us and let us aid you grow your business making use of our customizable and affordable items.

US $0.01-2.89
/ Piece
|
500 Pieces

(Min. Order)

###

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis

###

Customization:

###

Name Shaft/Motor Shaft/Drive Shaft/Gear Shaft/Pump Shaft/Worm Screw/Worm Gear/Bushing/Ring/Joint/Pin
Material 40Cr/35C/GB45/70Cr/40CrMo
Process Machining/Lathing/Milling/Drilling/Grinding/Polishing
Size 2-400mm(Customized)
Diameter φ5.8(Customized)
Diameter Tolerance 0.008mm
Roundness 0.005mm
Roughness Ra0.8
Straightness 0.05mm
Hardness HRC20-30
Length 17.1mm(Customized)
Heat Treatment Available
Surface treatment Coating/Ni plating/Zn plating/QPQ/Carbonization/Quenching/Black Treatment/Steaming Treatment/Nitrocarburizing/Carbonitriding
US $0.01-2.89
/ Piece
|
500 Pieces

(Min. Order)

###

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis

###

Customization:

###

Name Shaft/Motor Shaft/Drive Shaft/Gear Shaft/Pump Shaft/Worm Screw/Worm Gear/Bushing/Ring/Joint/Pin
Material 40Cr/35C/GB45/70Cr/40CrMo
Process Machining/Lathing/Milling/Drilling/Grinding/Polishing
Size 2-400mm(Customized)
Diameter φ5.8(Customized)
Diameter Tolerance 0.008mm
Roundness 0.005mm
Roughness Ra0.8
Straightness 0.05mm
Hardness HRC20-30
Length 17.1mm(Customized)
Heat Treatment Available
Surface treatment Coating/Ni plating/Zn plating/QPQ/Carbonization/Quenching/Black Treatment/Steaming Treatment/Nitrocarburizing/Carbonitriding

Screw Shaft Features Explained

When choosing the screw shaft for your application, you should consider the features of the screws: threads, lead, pitch, helix angle, and more. You may be wondering what these features mean and how they affect the screw’s performance. This article explains the differences between these factors. The following are the features that affect the performance of screws and their properties. You can use these to make an informed decision and purchase the right screw. You can learn more about these features by reading the following articles.

Threads

The major diameter of a screw thread is the larger of the two extreme diameters. The major diameter of a screw is also known as the outside diameter. This dimension can’t be directly measured, but can be determined by measuring the distance between adjacent sides of the thread. In addition, the mean area of a screw thread is known as the pitch. The diameter of the thread and pitch line are directly proportional to the overall size of the screw.
The threads are classified by the diameter and pitch. The major diameter of a screw shaft has the largest number of threads; the smaller diameter is called the minor diameter. The thread angle, also known as the helix angle, is measured perpendicular to the axis of the screw. The major diameter is the largest part of the screw; the minor diameter is the lower end of the screw. The thread angle is the half distance between the major and minor diameters. The minor diameter is the outer surface of the screw, while the top surface corresponds to the major diameter.
The pitch is measured at the crest of a thread. In other words, a 16-pitch thread has a diameter of one sixteenth of the screw shaft’s diameter. The actual diameter is 0.03125 inches. Moreover, a large number of manufacturers use this measurement to determine the thread pitch. The pitch diameter is a critical factor in successful mating of male and female threads. So, when determining the pitch diameter, you need to check the thread pitch plate of a screw.
screwshaft

Lead

In screw shaft applications, a solid, corrosion-resistant material is an important requirement. Lead screws are a robust choice, which ensure shaft direction accuracy. This material is widely used in lathes and measuring instruments. They have black oxide coatings and are suited for environments where rusting is not acceptable. These screws are also relatively inexpensive. Here are some advantages of lead screws. They are highly durable, cost-effective, and offer high reliability.
A lead screw system may have multiple starts, or threads that run parallel to each other. The lead is the distance the nut travels along the shaft during a single revolution. The smaller the lead, the tighter the thread. The lead can also be expressed as the pitch, which is the distance between adjacent thread crests or troughs. A lead screw has a smaller pitch than a nut, and the smaller the lead, the greater its linear speed.
When choosing lead screws, the critical speed is the maximum number of revolutions per minute. This is determined by the minor diameter of the shaft and its length. The critical speed should never be exceeded or the lead will become distorted or cracked. The recommended operational speed is around eighty percent of the evaluated critical speed. Moreover, the lead screw must be properly aligned to avoid excessive vibrations. In addition, the screw pitch must be within the design tolerance of the shaft.

Pitch

The pitch of a screw shaft can be viewed as the distance between the crest of a thread and the surface where the threads meet. In mathematics, the pitch is equivalent to the length of one wavelength. The pitch of a screw shaft also relates to the diameter of the threads. In the following, the pitch of a screw is explained. It is important to note that the pitch of a screw is not a metric measurement. In the following, we will define the two terms and discuss how they relate to one another.
A screw’s pitch is not the same in all countries. The United Kingdom, Canada, and the United States have standardized screw threads according to the UN system. Therefore, there is a need to specify the pitch of a screw shaft when a screw is being manufactured. The standardization of pitch and diameter has also reduced the cost of screw manufacturing. Nevertheless, screw threads are still expensive. The United Kingdom, Canada, and the United States have introduced a system for the calculation of screw pitch.
The pitch of a lead screw is the same as that of a lead screw. The diameter is 0.25 inches and the circumference is 0.79 inches. When calculating the mechanical advantage of a screw, divide the diameter by its pitch. The larger the pitch, the more threads the screw has, increasing its critical speed and stiffness. The pitch of a screw shaft is also proportional to the number of starts in the shaft.

Helix angle

The helix angle of a screw shaft is the angle formed between the circumference of the cylinder and its helix. Both of these angles must be equal to 90 degrees. The larger the lead angle, the smaller the helix angle. Some reference materials refer to angle B as the helix angle. However, the actual angle is derived from calculating the screw geometry. Read on for more information. Listed below are some of the differences between helix angles and lead angles.
High helix screws have a long lead. This length reduces the number of effective turns of the screw. Because of this, fine pitch screws are usually used for small movements. A typical example is a 16-mm x 5-inch screw. Another example of a fine pitch screw is a 12x2mm screw. It is used for small moves. This type of screw has a lower lead angle than a high-helix screw.
A screw’s helix angle refers to the relative angle of the flight of the helix to the plane of the screw axis. While screw helix angles are not often altered from the standard square pitch, they can have an effect on processing. Changing the helix angle is more common in two-stage screws, special mixing screws, and metering screws. When a screw is designed for this function, it should be able to handle the materials it is made of.
screwshaft

Size

The diameter of a screw is its diameter, measured from the head to the shaft. Screw diameters are standardized by the American Society of Mechanical Engineers. The diameters of screws range from 3/50 inches to sixteen inches, and more recently, fractions of an inch have been added. However, shaft diameters may vary depending on the job, so it is important to know the right size for the job. The size chart below shows the common sizes for screws.
Screws are generally referred to by their gauge, which is the major diameter. Screws with a major diameter less than a quarter of an inch are usually labeled as #0 to #14 and larger screws are labeled as sizes in fractions of an inch. There are also decimal equivalents of each screw size. These measurements will help you choose the correct size for your project. The screws with the smaller diameters were not tested.
In the previous section, we described the different shaft sizes and their specifications. These screw sizes are usually indicated by fractions of an inch, followed by a number of threads per inch. For example, a ten-inch screw has a shaft size of 2” with a thread pitch of 1/4″, and it has a diameter of two inches. This screw is welded to a two-inch Sch. 40 pipe. Alternatively, it can be welded to a 9-inch O.A.L. pipe.
screwshaft

Shape

Screws come in a wide variety of sizes and shapes, from the size of a quarter to the diameter of a U.S. quarter. Screws’ main function is to hold objects together and to translate torque into linear force. The shape of a screw shaft, if it is round, is the primary characteristic used to define its use. The following chart shows how the screw shaft differs from a quarter:
The shape of a screw shaft is determined by two features: its major diameter, or distance from the outer edge of the thread on one side to the inner smooth surface of the shaft. These are generally two to sixteen millimeters in diameter. Screw shafts can have either a fully threaded shank or a half-threaded shank, with the latter providing better stability. Regardless of whether the screw shaft is round or domed, it is important to understand the different characteristics of a screw before attempting to install it into a project.
The screw shaft’s diameter is also important to its application. The ball circle diameter refers to the distance between the center of two opposite balls in contact with the grooves. The root diameter, on the other hand, refers to the distance between the bottommost grooves of the screw shaft. These are the two main measurements that define the screw’s overall size. Pitch and nominal diameter are important measurements for a screw’s performance in a particular application.

Lubrication

In most cases, lubrication of a screw shaft is accomplished with grease. Grease is made up of mineral or synthetic oil, thickening agent, and additives. The thickening agent can be a variety of different substances, including lithium, bentonite, aluminum, and barium complexes. A common classification for lubricating grease is NLGI Grade. While this may not be necessary when specifying the type of grease to use for a particular application, it is a useful qualitative measure.
When selecting a lubricant for a screw shaft, the operating temperature and the speed of the shaft determine the type of oil to use. Too much oil can result in heat buildup, while too little can lead to excessive wear and friction. The proper lubrication of a screw shaft directly affects the temperature rise of a ball screw, and the life of the assembly. To ensure the proper lubrication, follow the guidelines below.
Ideally, a low lubrication level is appropriate for medium-sized feed stuff factories. High lubrication level is appropriate for larger feed stuff factories. However, in low-speed applications, the lubrication level should be sufficiently high to ensure that the screws run freely. This is the only way to reduce friction and ensure the longest life possible. Lubrication of screw shafts is an important consideration for any screw.

China ODM/OEM Needle CNC Lathing Grinding High Precision Motor Rotor Drive Stainless Steel Shaft for Medical Machine with Surface Treatment Best Service     set screw shaft collarChina ODM/OEM Needle CNC Lathing Grinding High Precision Motor Rotor Drive Stainless Steel Shaft for Medical Machine with Surface Treatment Best Service     set screw shaft collar
editor by czh 2023-01-19

Screw Jack

As one of the leading screw jack manufacturers, suppliers, and exporters of mechanical products, We offer screw jacks and many other products.

Please contact us for details.

Manufacturer supplier exporter of screw jack.

Recent Posts